Mobotix Q24M-SEC-D11

The Mobotix Q24M-SEC-D11 offers high resolution video with a 360 degree panoramic view. Offering 3 megapixel quality and resolutions up to 2048 x 1536, the camera offers the ability to monitor a large viewing area while still being able to zoom in on the video for a clearer image of any person or object. The Q24M-SEC-D11 easily mounts to a ceiling either indoors or outdoors and offers a discreet presence not attracting attention.

Loaded with features, the Q24M-SEC-D11 boasts as a stand alone solution offering a built-in web server with the ability to record to a local MicroSD memory card, network attached storage and offer alerts of motion detection via email, FTP and VOIP. Free downloads are available on the Mobotix website for software that can be installed to record and monitor from the camera.

The Mobotix Q24M-SEC-D11 is an ideal solution for any type of application (both indoor and outdoor) requiring a wide viewing angle without the need for multiple cameras.

For more information on Mobotix or the Q24M-SEC-D11, contact Network Camera Store at (877) 638-2260 or visit www.networkcamerastore.com.

Vivotek IP7330 – Low Cost Bullet Camera

The Vivotek IP7330 is a low cost bullet network IP camera loaded with features ideal for home or small business use. With an IP67 outdoor weatherproof housing, the IP7330 can be installed outdoors and protected from harsh weather elements including dust and rain. The built-in IR illuminators allow for viewing video even in no light. The illuminators allow video to be seen for up to 10 meters.

The IP7330 also supports power over ethernet allowing the camera to be installed in areas where running power would be difficult.

The Vivotek IP7330 boasts many additional features including built-in motion detection, tamper detection, HTTPS encryption, digital i/o for external alarm installation and simultaneous streaming.

The Vivotek IP7330 comes with free PC based recording software however Mac based recording software is also available.

For more information on the Vivotek IP7330, visit www.networkcamerastore.com or call (877) 638-2260.

——————————————

The original post of this article can be viewed here: http://www.networkcamerastore.com/camera-features/featured-low-cost-bullet-camera/

Y-cam Knight IR Wireless IP Camera

The Y-cam Knight comes loaded with features and is an ideal IP camera for any home or business application. With support for both PC and Mac operating systems,the Y-cam Knight allows for easily local and remote monitoring from your PC, Mac or mobile device.

Y-cam Knight Features

• IR Support for viewing video in complete darkness
• Wireless functionality
• 30fps video at 640×480 resolution
• Audio support with integrated microphone
• MPEG-4 / MJPEG video compression
• Includes free PC based recording software (supports up to 36 total Y-cam IP cameras)

For more information on the Y-cam Knight or Y-cam Cameras, visit www.networkcamerastore.com or call (877) 638-2260.

View the original post here.

Vivotek has recently released a video on their YouTube channel that demonstrates how you can access Vivotek IP camera and video server (video encoder) devices on an iPhone. Vivotek IP cameras and video servers can be configured to use MJPEG video compression. By doing so, access to these devices is then possible through multiple web browsers including the Safari web browser on the Apple iPhone. Once the IP camera or video server has been configured to use a MJPEG video feed and remote access has also been configure so that you gain access via the Internet, accessing live video is as easy as typing in the device’s IP address in the Safari browser. Be sure to check out the video posted below to see how easy it is to access live video from a Vivotek IP camera or video server on your iPhone.

-

Y-cam has recently announced via their website that a new product firmware for the Y-cam SD range of IP camera devices includes support that will enable the Y-cam SD network cameras to fully function on a Mac based computer system. Firmware version 4.08, available now on the Y-cam website, has been designed to utilize the SD’s redesigned chipset and will now allow full Macintosh (Mac) computer compatibility for the entire SD range of Y-cam IP camera products. This latest firmware release allows QuickTime to be used to display video and audio with Adobe Flash being utilized for motion detection setup. With QuickTime Pro you can even record video locally to a Mac computer system. This latest firmware release comes as a welcome alternative to a network video surveillance market that has relied heavily on ActiveX controls and Windows based computer systems. Be sure to check out the entire range of Y-cam products listed on the Network Camera Store website and remember to download the latest Y-cam firmware release (www.y-cam.com) if you are a Y-cam SD IP camera owner already.

-